- Energz UPS

Myria Series UPS 60-200kW

High Reliability

Wide input voltage and frequency range with high grid
adaptability and prolong battery life.
Separate internal air channel which hot air drives directly
towards heat sink without distressing the PCB’s and other
internal sensitive components, improving the components
service life and UPS reliability
High overload capacity on inverter and bypass
The most advanced and dual DSP control prevents single
failure point and increase performance.
Intelligent fan control and redundant design: 15% load can be
driven when 2 fans fail and 40% load when 1 fan fails
Integrated with input,output,bypass breaker and manual bypass
switch for better protection of system.
All-round conformal coating to all PCB boards, protect
electronics from environmental effection and corrosion.
High short circuit capacity with time duration settable from
20~200ms which provide high protection for system.
Cold start function which allow UPS start on battery when grid
isn’t available.
Bus synchronization control function provides reliable high
power for dual bus application
Power walk in function decrease the inrush to mains or
generator.
Start up delay function,to sequentially restart the rectifires once the mains power supply is restored if there are several UPS within the overall system
No derating operate up to 40°C and continiously running under
high ambient temperature up to 50°C with auto-derating

1.Power unit
2.Bypass and control unit
3.Power distribution unit

Advanced IGBT and three level technology, Low harmonic,
high efficiency,effectively energy-saving
High power density design, which small footprint on 100KW
only 0.38m² for saving installation space.
High input power factor up to 0.99 and low Input THDi: < 3.0%
at full load, much less grid pollution and costs
AC/AC efficiency up to 96.5% and 30% load up to 95% efficiency reduces heat dissipation and limits power consumption costs
Eco mode efficiency up to 99.2% lead to significant cost reduction
W-ECO mode could reach 98.5% efficiency, THDI below 5% and transfer time below 4ms to reduce TCO
Self-load test function, easy debugging and easy onsite test
during commissioning, before it is connected the real load,
without using costly temporary loads, cabling and breakers for
energy saving.
Parallel ECO mode maximum whole system effciency.
Intelligent sleep mode which UPS sleep in random keep
maximum efficiency and energy saving
8 units of intelligent paralleling helps to achieve maximum
capacity up to 1.6MW.

Fault Trace Management (FTM) for convenient failure analysis
(waveform record before & after of the fault point for 200ms)
which easily figure out faulty point
3 stage battery charging prolong the service life of batteries
Intelligent battery management and mutiple setting, ±14~±24
pcs batteries per string allow customers to get the faulty
battery out instead of replacing it
Key components pre-alarm function which precaution the
system fault and remind service for key components, like
capacitor, fan.
Full asset management record the spare parts replacement,
timeline and service people.
Cabinet temperature detect and pre-notification which prevent over temperatur
Smart programmable dry contact which have 5 input dry
contact and 3 output dry contact, which input dry contact
have more than 10 functions and output dry contact have 18
functions allows to settable at site.
Smart generator mode which allow UPS sent signal to turn
on and off generator, also taking part power from battery to
compensation generator capacity.
Self-dedusting function which save the preventive service
time.
Common battery bank on parallel mode.
Frequency converter function (60Hz to 50Hz or 50Hz to 60Hz)
VRLA and Lithium battery compatible design